BEST SELLER

9KOHX 9,000 lb Overhead 2-Post Lift

$ 1,599

$ 2,399

BIG SAVE!

Quantity

The light duty Atlas® 9KOHX lift is an economy designed overhead, clear-floor 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV’s and light duty trucks. The 9KOHX can be adjusted to two different height settings, either 11′ 6″ or 11′ 10″, allowing it to fit in almost any standard garage.

The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks. The Atlas® 9KOHX two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.

The 9KOHX is the perfect choice for those who demand the most lifting capacity at the lowest possible price.

Features :

9,000 lb. Capacity
Overhead, Open-Floor design
Overall Height: 138″ (11′ 6″) or 142″ (11′ 10″)
Asymmetric/Symmetric Arms
Automatic Arm Restraints
Dual-Point Lock Release
Rubber Guards on Carriages
Dual Hydraulic Chain-Drive Cylinders
Secondary Lock System
Free 8 Piece Truck Adapter Set
Free set of Sliding Arm Adapters
Mounting Hardware Included
Shipping Weight: 1,450 lbs.
2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

Specifications :

Atlas® 9KOHX Specifications
Capacity	9,000 LB.
Overall Height	138" (11’ 6") or 142” (11’ 10”)
Overall Floor Width	134 1/2" (11’ 2 1/2")
Outside Column to Outside Column	124 7/8" (10’ 4 7/8")
Maximum Lift Height (Without Adapters)	74 1/2"
Maximum Lift Height (With Adapters)	81"
Minimum Arm Height	4"
Inside Column	110” (9’ 2”)
Drive Thru	100” (8’ 4”) Symmetric/ 90 1/2" (7’ 6 1/2”) Asymmetric
Column Size	7 1/4" x 11"
Column Thickness of Steel	5mm
Base Of Lift	14 1/4" x 18"
Motor/Electrical Requirement	220 volt single (1) phase. A 30 amp breaker is recommended
Oil Requirement	3-5 Gallons AW32/AW46 (NOT INCLUDED)
Shipping Weight	1,450 LBS.
Adapter Heights	4 Each 1.5”, 5”
Arm Hole/Adapter Peg Size	1.5”